Heat Pump Installation
Heat Pump Installation in Saskatoon, SK
Expert installation. Premium equipment. Year-round comfort. A high-efficiency heat pump is one of the smartest investments a Saskatoon home can make. Whether you’re upgrading from an aging furnace or adding supplemental cooling, a properly installed heat pump delivers reliable heating and air conditioning from a single, energy-efficient unit. At Aviation Mechanical, we specialize in professional heat pump installation using Armstrong Air and Mitsubishi equipment — ensuring your system is sized right, zones are optimized, and performance meets the demands of Saskatchewan’s climate.
Get a Free Heat Pump Installation Assessment
Why Choose Aviation Mechanical for Heat Pump Installation
Armstrong Air and Mitsubishi Expertise
As an Armstrong ProTeam dealer, we install and service two of North America’s most reliable heat pump brands. Every unit we install is matched to your home’s heating and cooling profile, ductwork capacity, and climate zone, so you get maximum efficiency and comfort.
-
Precision Sizing and Load Calculation
An oversized or undersized heat pump wastes energy and money. Our technicians perform detailed Manual J load calculations — accounting for insulation, window placement, occupancy, and Saskatchewan’s heating degree days — so your system delivers exactly what your home needs without waste.
-
Seamless Installation and Zoning
Professional installation means careful ductwork integration (or ductless mini-split routing), proper refrigerant charge, electrical safety, and zone configuration. Our crew documents every step so your system performs at nameplate capacity from day one.
-
Professional Repair and Maintenance Support
After installation, equipment sometimes needs attention. We provide reliable repair service and tie your new heat pump into our “HIP” HVAC Inspection Program, so routine tune-ups keep efficiency high and unexpected breakdowns stay rare.
-
Local, Established Service
Our team has served Saskatoon and surrounding areas since 2004. We show up on time, explain your options clearly, and stand behind our installation work because we live and work right here in the community.
-
Transparent Pricing and Financing Options
We provide upfront quotes with no hidden charges. If upfront cost is a concern, Finance It partners offer flexible monthly payment plans so you can enjoy your new heat pump immediately.
Get a Free Heat Pump Installation Assessment
Ready to explore whether a heat pump is right for your Saskatoon home? Talk to our team about your heating and cooling situation. We’ll walk through equipment options (ducted vs. ductless, single-zone vs. multi-zone), efficiency ratings (SEER and HSPF), ductwork requirements, electrical upgrades, and a realistic timeline and investment range. Whether you’re replacing an old furnace, adding cooling to a heating-only home, or upgrading to a more efficient system, our consultation is free, no pressure, and backed by over two decades of local expertise.
What a Free Assessment Covers for Your Home
Ducted vs. Ductless Equipment
We’ll walk through whether a ducted heat pump using your existing forced-air system or a ductless mini-split with individual zone units is the right fit for your home’s configuration and comfort goals.
Efficiency Ratings (SEER and HSPF)
Armstrong Air and Mitsubishi units come in a range of SEER and HSPF ratings. We explain what these mean for your heating and cooling costs so you can match your efficiency goals and upfront investment preferences.
Ductwork Requirements
If your current ducts are in good condition, we integrate the new heat pump directly. If they’re leaky, undersized, or obstructed, we’ll recommend sealing, insulation, or strategic modifications to maximize airflow and efficiency.
Electrical Upgrades
Some installs require a dedicated circuit or a service panel upgrade. We confirm your home’s electrical capacity during the survey and coordinate any code-compliant work needed before installation day.
Realistic Timeline and Investment Range
Whether you’re replacing an old furnace, adding cooling to a heating-only home, or upgrading to a more efficient system, we lay out a firm timeline and a straightforward investment range up front.
Year-Round Comfort From One System
A heat pump provides both heating and cooling from a single unit. We’ll show you how one properly installed system delivers reliable winter heat and efficient summer cooling — and how it can lower your energy costs.
Ready to explore your options? Tell us about your home and we’ll design the right heat pump system.
What Saskatoon Customers Say About Our Installation Work
A new heat pump is a major investment, and you are trusting a contractor to size it right and install it properly. Here is what homeowners and businesses across Saskatoon have said after we showed up.
Our Heat Pump Installation Process
Site Survey and System Design
Our technician visits your home to assess heating and cooling needs, evaluate existing ductwork, check electrical capacity, and identify any space constraints. We perform a detailed Manual J load calculation — the industry standard for sizing HVAC equipment — to determine the correct capacity and efficiency rating for optimal performance in Saskatchewan’s climate. This calculation accounts for your home’s insulation value, window area, occupancy patterns, and local heating degree days. This assessment typically takes 1–2 hours and is essential for ensuring your new system delivers reliable comfort without wasting energy.
- Evaluate current heating system condition, age, and existing ductwork layout
- Calculate heating/cooling load using industry-standard Manual J methodology with local climate data
- Review equipment options including single-zone and multi-zone configurations, inverter compressor technology, and variable-speed options
- Assess optimal indoor and outdoor unit placement for maximum airflow, minimal noise, and electrical efficiency
- Confirm your home’s electrical service capacity and identify any circuit upgrades or panel work needed
- Evaluate insulation and air sealing opportunities that can maximize heat pump efficiency
Equipment Selection and Ordering
Once we’ve completed the load calculation, we present equipment options and efficiency levels tailored to your home’s specific needs and your budget. Armstrong Air and Mitsubishi units come in a range of SEER ratings from 14 to 21+ and HSPF ratings from 8 to 10+, allowing us to match your efficiency goals and upfront investment preferences. We review warranty coverage, manufacturer support, and long-term reliability. We then order the exact configuration you choose, source all necessary accessories and controls, and confirm a firm installation date that works for your schedule.
- Present Armstrong Air and Mitsubishi equipment options with detailed efficiency specs, warranties, and expected energy savings
- Explain SEER and HSPF ratings, what they mean for your heating/cooling costs, and how they compare to your current system
- Discuss zoning capability (single vs. multi-zone) and advanced controls including smart thermostats and mobile app integration
- Review all financing options including Finance It partnerships and confirm eligibility for manufacturer rebates or utility incentives
- Confirm equipment delivery timeline, coordinate with any electricians for panel work, and schedule your installation crew
- Provide written equipment specifications and warranty documents for your records
Prepare Your Home and Crews
Before installation day, we schedule and complete any necessary ductwork modifications, electrical upgrades, or site preparation. If your existing ducts need sealing, insulation, or reconfiguration, we handle that beforehand to maximize airflow and system efficiency. If electrical panel work is required — such as a dedicated circuit or service upgrade — we coordinate with a licensed electrician and ensure all work meets code. Our crew will need attic, basement, or crawlspace access, so we discuss logistics in advance to minimize disruption to your family and plan work zones that protect your home.
- Schedule and complete ductwork sealing, insulation, or modifications to optimize airflow and efficiency
- Verify electrical panel upgrade or new circuit installation is complete and code-compliant
- Confirm outdoor unit pad or concrete foundation placement and drainage (if needed)
- Schedule any secondary trades (electrician, roofer for outdoor unit mounting, etc.)
- Set up protective floor coverings, plastic sheeting, and work zones to protect your home during installation
- Confirm access to attic, basement, crawlspace, and outdoor areas; discuss any home access concerns or security precautions
Professional Installation and System Commissioning
On installation day, our certified crew removes your old equipment (if applicable), installs the new heat pump indoor and outdoor units, connects refrigerant and electrical lines, seals all ductwork joints, and performs a full system check. We verify proper airflow, refrigerant charge, thermostat calibration, and emergency controls. The job typically takes 1–3 days depending on ductwork and electrical scope.
- Remove old furnace or air handler and outdoor unit
- Install new indoor and outdoor heat pump units per manufacturer specifications
- Connect refrigerant lines with proper nitrogen purge and evacuation
- Route electrical supply and thermostat wiring with safety lockouts
- Insulate and seal all ductwork joints to prevent air leakage
- Perform nitrogen pressure test and vacuum-evacuation for moisture removal
- Charge refrigerant to exact specification and verify system capacity
- Test all safety controls and emergency shut-off switches
Handoff, Training, and Long-Term Support
After your heat pump is fully commissioned and tested, our team walks you through every aspect of operation and maintenance. We program your smart thermostat, explain heating and cooling modes, show you how to adjust temperature schedules for different seasons, and review the mobile app if your system includes one. We discuss year-round maintenance tasks — monthly filter changes, annual outdoor coil cleaning, and seasonal refrigerant and electrical checks — and explain how to recognize when professional service is needed. We review all warranty coverage, register your equipment with the manufacturer, and enroll you in our “HIP” HVAC Inspection Program so seasonal tune-ups keep your system running at peak efficiency and preserve your warranty.
- Walk through thermostat operation, temperature settings, mode selection, and scheduling features
- Demonstrate mobile app features and remote temperature control (if applicable)
- Explain seasonal maintenance tasks (monthly filter changes, annual coil cleaning, refrigerant inspections)
- Review equipment warranty coverage, manufacturer requirements, and how to file claims if needed
- Register your new equipment with the manufacturer and activate extended warranty options (if available)
- Discuss how to reach us for repair service and schedule follow-up maintenance
- Enroll in our preventive maintenance plan (“HIP” program) and schedule your first seasonal tune-up
- Provide written maintenance reminders, seasonal optimization tips, and direct contact information for service requests
Compare Heat Pump and Furnace Options
A heat pump isn’t for every home. During your assessment we’ll compare a heat pump against a traditional furnace-and-AC combination, weigh efficiency levels and zoning configurations, and explain how each performs in Saskatchewan’s climate — so you can make the right choice for your home and budget. If a forced-air system is a better fit, we design and install those too.
Heat Pump Systems and Configurations We Install
Ducted Heat Pump Systems
A ducted heat pump uses your existing ductwork to distribute heated or cooled air throughout your home — ideal if you already have a forced-air system. We integrate the new unit, seal your ducts, and verify airflow at every vent.
Schedule This InstallationDuctless Mini-Split Systems
A ductless mini-split mounts individual wall or ceiling units in different zones, perfect for homes without ducts or when controlling areas independently. Explore our mini-split installation options for room-by-room comfort.
Explore Mini-Split InstallationMulti-Zone Configurations
Zoning lets you set different temperatures in different areas of your home for maximum comfort and efficiency. We design multi-zone systems that give you independent control where you need it.
Schedule This InstallationHigh-Efficiency Inverter Units
Inverter-driven Armstrong Air and Mitsubishi units run at variable speed for quiet, energy-efficient operation and reliable performance in cold weather. We match the efficiency rating to your goals and budget.
Schedule This InstallationSmart Thermostat Integration
Modern controls and mobile apps let you schedule temperatures, monitor performance, and adjust settings remotely. We program and configure smart thermostats as part of every install.
Schedule This InstallationCold-Climate Heat Pumps
Engineered to keep working when temperatures fall well below freezing, cold-climate heat pumps extract heat from outdoor air even in deep cold. We verify low-temperature performance for your climate zone.
Schedule This InstallationDuctwork Integration and Sealing
Leaky or undersized ducts steal heated and cooled air. We seal, insulate, and modify ducts as needed so your new heat pump delivers full capacity to every room.
Explore Ductwork ServicesElectrical Upgrades and Circuits
Some heat pump installs require a dedicated circuit or a service panel upgrade. We coordinate all code-compliant electrical work so your new system is powered safely and reliably.
Schedule This InstallationFrequently Asked Questions About Heat Pump Installation
Heat Pump Installation Throughout Saskatchewan
We install heat pumps throughout Saskatoon and surrounding communities, bringing certified expertise, Armstrong Air partnership credentials, and responsive local service to every area we serve.
Don’t See Your Location?
We serve Saskatoon and communities within about a 30-minute drive. If your town isn’t listed, give us a call — chances are we can still help.
Keep Your Home Comfortable Year-Round
Schedule Your Heat Pump Installation Today
Installing a high-efficiency heat pump is one of the smartest comfort and energy-efficiency decisions a Saskatoon homeowner can make. A properly sized and installed heat pump delivers reliable heating in winter, efficient cooling in summer, and significantly lower energy costs compared to an old furnace-and-AC setup. Aviation Mechanical handles the entire process — from detailed Manual J load calculations and equipment selection through professional installation, commissioning, system testing, and ongoing maintenance support.
Our team has the expertise to help you navigate equipment options (ducted vs. mini-split, efficiency levels, zoning configurations), understand how a heat pump performs in Saskatchewan’s climate, and make the right choice for your home and budget. Whether you’re replacing an aging furnace, adding air conditioning to a heating-only home, or upgrading to a more advanced system, we know how to do it right.
Flexible financing available through Finance It — energy-efficient heat pumps can pay for themselves over time through lower utility bills.